I recommend you use one easy to use and powerful software, Lazesoft Recovery Suite, to create a boot recovery disk for fixing the error "NTLDR is missing". Download Lazesoft Recovery Suite and set it up on another working computer. Insert the burned boot disk into your broken computer and then reboot from it.
Press F12, F2, or Esc key, when rebooting, normal you will get a boot menu. Select the Windows installtion volume you need to fix. How to fix boot problems if Windows won't start correctly. How to boot from the created Windows recovery CD. Lazesoft Recovery Suite is a very easy to use ALL-IN-ONE boot disk that repair your crashed Windows, recover data from deleted, formatted, damaged partition, clone or backup disk, reset your forgotten Windows password.
Download Order Now! This key depends on the computer manufacturer and computer model. Step 4: Use the arrow keys to select the Boot tab. Move the hard drive to the top of priority list. On Intel-based computers, the system partition must be a primary partition that has been marked as active for startup purposes. There can be only one active system partition at a time.
If you want to use another operating system, you must first mark its system partition as active before restarting the computer. More details can be found in Hard disk active partition.
MiniTool Partition Wizard is a wise choice for most common users to set partition as active since this tool offers wizard-based operation, high security and excellent performance.
Detailed steps are here. Buy Now. Step 2. Select the target partition which needs to be set as active and then click "Set Active" module. Click to tweet. So well, please make sure that the latest revision for BIOS is installed on the computer. Correcting the MBR takes a few different directions, choose any of the following sections:.
Performing a "Repair" installation of windows. You can choose to repair a windows installation from the recovery console. Once you are logged in to your recovery console, select the number that represent your C: drive more than likely it will be 1. It will ask for your admin password, enter it you have one or just hit enter if you don't know it. Follow the recovery console instructions from here:. If neither of those options worked, try checking your hardware, replace cables, try different power cable, ensure jumpers are on properly, ensure that the drive you want to boot from is on the Primary IDE connection IDE 0 and is set as the first device on the IDE cable Master.
At best your data is still intact, so you can put the drive in another computer and back it up. Once back into Windows, right click on the My Computer option, choose the Manage option. The Computer Management window will open, click on "Disk Management" on the left pane. One of the disks it lists, and one of the drives on it, will need to be marked as active. It will be which drive letter you have placed the 3 boot files into this will likely be the C: drive on Disk 0.
Right click on that drive letter and select "Mark Partition as Active", you may first have to convert the partition to a Primary partition before you can mark it as active. Close and reboot. If that doesn't work, go into "My Computer", right-click each hard drive, select "Properties", switch to the "Tools" tab, click the "Check Now" button, check both options then click "Start"; if you selected the system partition it will require it to be rebooted and done outside of Windows.
When you reboot you will see a message about "Disk checking will begin in 7 seconds", let it do this and don't skip it. It may take awhile and will boot back into Windows when it's done. If that doesn't immediately work, and you have more hard drives than just C:, try placing the 3 boot files into other drives like D:, E:, F:, etc. Reboot each time to check if that was the one that fixed it, and when you find the correct one, mark it as active.
If you had a Win 9x install on this machine you may need to also run the command: sys c: or d, e, or f for the installation. Go into the recovery console by booting up with a Windows XP cd and go through the options till you get to the recovery console, you will need the admin password for this option if you do not know it, just hit enter, that will work if it is blank. Then issue the command: fixboot.
Purchase a new hard drive, remove the old one, install the new one as master, install your OS, install the old one as slave remember to change jumpers , copy all the data off the old hard drive, burn CD's or DVD's of the most important stuff, perform a low-level format of the old drive, make a partition on it and use it as backup storage drive or just another place to store your stuff. See more of Tiny Empire's ShortNotes to fix your problems.
All TinyEmpire. Site maintained by i milescomer. Here are the instructions to do this: 1. Try it first, if it was the wrong selection, you will likely get one of these four errors: 1. DOS 4. Immediate reboot If you get the immediate reboot or some other weird error, try pressing F8 at the "1st Try This" selection screen, it will give you a prompt where you can select Safe Mode, and then try the "1st Try This" option again. Use windows to fix the boot files on the hard drive.
0コメント